Climaveneta’s Air Cooled Chillers
Outdoor unit for the production of chilled water with fixed speed and variable speed (Inverter Driven), scroll compressors, optimized for R410A in a single-circuit configuration, axial-flow fans, micro-channel full-aluminum air coils and electronic expansion valve as standard equipment…
Outdoor unit for the production of chilled water with fixed speed and variable speed (Inverter Driven), scroll compressors, optimized for R410A in a single-circuit configuration, axial-flow fans, micro-channel full-aluminum air coils and electronic expansion valve as standard equipment. Flexible and reliable unit; it easily adapts itself to different thermal load conditions thanks to the precise temperature control together with the use of inverter technology. The high performance’s level, both full and partial load, is achieved thanks to the accurate unit’s design and to the use of fixed speed motor together with variable speed (inverter) motor.
Unit with high efficiency and reduced energy consumption, thanks to the inverter technology, contributing to lower operating costs and therefore, achieving a quick return on investment.
The highest level of efficiency at part load, thanks to the inverter technology, can meet and exceed the minimum seasonal efficiency for cooling, SEER, according with the eco-sustainable design requirements for all products using energy. The units already comply with the minimum seasonal energy efficiency requirements that will start from 2021. For this reason, the unit represents the best choice for all the hydronic application on the residential and commercial markets. The unit is suitable also for industrial market, satisfying the seasonal energy performance ratio SEPR.
Varible Primary Flow
Energy saving due to variable pump speed management based on load demand and the variable flow assures the functioning of the units also with critical working conditions.
Integrated Hydronic Module
The built-in hydronic module already contains the main water circuit components; it is available as option with single or twin in-line pump, for achieving low or high head, fixed or variable speed and buffer tank.
Electronic Expansion Valve Supplied Standard
The use of the electronic expansion valve generates considerable benefits, especially in cases of variable demand and at different working conditions. It guaranteed energy saving due to efficiency optimization in various different working conditions. The electronic thermostatic valve allows you to obtain speed in reaching machine stability and an extension of the operating limits.
Aluminium Micro-Channel Heat Exchangers
This new range of chiller uses aluminum micro-channel condensers that ensure a premium level of efficiency. This solution also allows to reduce the refrigerant charge with respect to traditional copper/aluminium coils and to reduce the weight of the unit.
Wide Operating Range
Full load operation is ensured with outdoor air temperature up to 48°C during summer. Dedicated accessories allow the unit operation down to -20°C of outdoor air temperature during winter. Production of evaporator leaving water temperature from -10°C to 20°C.
Remote control keyboard (distance to 200m and to 500m)
Set-up for remote connectivity with ModBus/Echelon protocol cards
Compressor power factor correction
Hydronic kit available in different configurations with 1 or 2 pumps fixed speed or variable speed and buffer tank
VPF (Variable Primary Flow) system
EC fans with electronic DC brushless motor
LOW NOISE KIT (only on no silenced versions)
User Limit Control (U.L.C.) function allows a startup of the unit in all critical conditions of water and air temperature, always under the operating limits of the unit.
Night mode is a system setting to limit maximum noise level of the unit.
Microchannel coils with e-coating protection
Traditional coils with copper tubes and alluminium fins, also available with pre-painted fins or Fin Guard Silver protective treatment.
Copper-Copper heat exchanger coils